Product Description

Polar Cement Primer (Interior)

Polar Cement Primer is specially designed for interior applications. It can be used for priming on plastered surfaces and other masonry works. It makes the surface less absorbent. Polar Cement Primer is a water-based primer, and it consists of copolymers, imported pigments and extenders, so as to ensure deep penetration and sealing of porous surfaces. In order to achieve reasonable opacity, it is pigmented white.

Thinning

Up to 50% by volume using water.

Coverage*

90-100 sq. ft./Itr/coat, when applied

on smooth and non-absorbent surfaces.

*Actual coverage may vary depending on of application, surface roughness & surface porosity.

method & condition

Shades Available

White

(Please note: Polar Cement Primer is an undercoat.)

Available Pack Size

1 Ltr, 4 Ltr, 10 Ltr, 20 Ltr

Directions For Use:

Surface Preparation:

Remove all loose or poorly adhering materials by rubbing down using Sand Paper No.60/80/120 in phases

and thereafter wipe clean. Ensure the surface is clean, dry, and free from all defective or poorly adhering 

material, dirt, grease, wax etc. Additional care of cleaning the walls needs to be taken in case of repainting.

Application:

Apply the Tulsi Paints Polar Cement Primer using brush or spray with dilution ratio of 1:0.5 with water. Let it

dry for 4-5 hours. Apply two to three coats of Tulsi Paints interior emulsion of your choice. However, time interval depends on climatic conditions and dilution should always be done considering the brush ability and roller ability of the material.